gluing instructions

gluing instructions

We offer a wide variety of sticker types. That's why there are different adhesive instructions

Slightly detach the sticker from the paper and cut off the paper to about 1/3.

Align and press decal, then peel off remaining paper.

press on the rest of the sticker. Should be air bubbles under the sticker. 1.: small air bubbles disappear. 2.: Attach larger air bubbles with a needle.

Slightly detach the sticker from the paper and cut off the paper to about 1/3.

press on the rest of the sticker. Should be air bubbles under the sticker. 1.: small air bubbles disappear. 2.: Attach larger air bubbles with a needle.

Gluing instructions with transfer film

Clean the surface with a suitable agent. The surface should be free of grease and dust.

Note the minimum temperature of approx. 10 degrees C.


Important: Align larger stickers beforehand and fix them with adhesive tape. It will also be better if you use a glue squeegee.


Remove the sticker with the transfer foil/paper and cut off a piece of the paper on the back

Align and press decal and peel off remaining paper

Press on the remaining sticker and remove the transfer film.

Adhesive instructions for number plate stickers

Clean the surface with a suitable agent. The surface should be free of grease and dust.

Note the minimum temperature of approx. 10 degrees C.



Slightly detach the sticker from the paper and cut off the paper to about 1/4.

Align and press decal and peel off remaining paper

press on the rest of the sticker. Should be air bubbles under the sticker. 1.: small air bubbles disappear. 2.: Attach larger air bubbles with a needle.

...

...

Share by: